The Glaucus

For posts about your own soft robot designs. Look here for Super-Releaser official releases, robot downloads, and details on specific designs.
Post Reply
User avatar
Gianteye
Site Admin
Posts: 18
Joined: Fri Feb 14, 2014 8:30 pm
Location: NYC
Contact:

The Glaucus

Post by Gianteye » Mon Mar 24, 2014 5:19 pm

Hi, folks. I just finished the latest Super-Releaser design. It's a soft robotic quadruped called the Glaucus, and I urge you to give it a look. This post has links to where you can download the design, read a tutorial on how to make your own, and lots more.

Image
Work stuff - Super-Releaser
Personal Stuff - HAR.MS

kevin29292
Posts: 1
Joined: Wed Mar 09, 2016 7:55 pm

Fluid Control

Post by kevin29292 » Wed Mar 09, 2016 8:09 pm

Good afternoon Gianteye, I have tried looking around online for a fluid control (specifically, the pneumatic system) that you guys use for the Glaucus. Since then I've been trying to make my own pneumatic system. I have ran into a problem where I'm not sure if i should make a pneumatic system that works such that:

The left hole on the luer seat increases with air, then decreases;
and then the right hole increases, then decreases.
OR
The left hole increases, the decreases while the right hole is increasing;
and then the right hole decreases while the left hole increases again.

I'm skeptical that the first idea will not even make the Glaucus walk forward. Will both ideas work? Or did you guys try something else that is better? Any help would be appreciated guys! Thank you!

User avatar
Ikyotochan
Posts: 3
Joined: Wed Apr 06, 2016 8:03 pm

Re: The Glaucus

Post by Ikyotochan » Fri Apr 08, 2016 4:59 pm

Thanks for the question kevin29292.

The Glaucus controls function as a fade between the two channels, and rely on an intentional constant bleed on the system. One of the factors behind this choice is that when you partially inflate the Glaucus, its legs bend down and grip the surface better, which helps it move a bit more with every step.

Hope this is helpful!

Post Reply